Regular air conditioning maintenance will ensure that your air conditioner is running at peak efficiency. The first step is to remove the evaporator drain. This is usually a one-inch PVC pipe. Clean out any debris or buildup from the filter. Then, check the condenser for debris and replace it if necessary. The technician will give your unit a general inspection and test the voltage. After that, they will inspect the motor, belts, ducts, drains and refrigerant. They will also examine the blower motor and thermostat.
The next step is to remove any plants or shrubs that may be blocking the airflow to the AC unit. Clear away any leaves and debris that may be lying on the floor near the unit. Make sure that electrical connections are tight. You can also use an electrical test meter to inspect the capacitors. If you feel uncomfortable performing the task yourself, call an HVAC technician to do it for you. You can include the condenser unit maintenance in your biannual checkups.
A trained HVAC technician will be able to find most problems early and prevent them from becoming a major issue. This service will cost about $100 and will include checking the unit’s internal parts. They will also check the filter, check the refrigerant charge, and clean the unit thoroughly. A professional will also answer any questions you have about your air conditioning unit. So, if you have a question, don’t hesitate to ask a Trane Comfort Specialist.
A trained technician will be able to diagnose and correct problems with your air conditioner in one visit. During a maintenance visit, they can check the cooling system and suggest a course of action. If you don’t feel comfortable doing this task yourself, you should call a local HVAC expert. They will be able to perform the necessary checks for you and your air conditioning system. If you’re not comfortable doing the repairs yourself, the technician will be unable to do it.
A professional will perform this procedure in a timely manner. It is important to make sure your air conditioner is plugged in and is not in use. After the maintenance visit, check the air conditioning system’s filter. A dirty filter can cause the unit to run at peak performance. If you’re worried about this, you should call a HVAC professional. A technician can provide you with tips and tricks on how to maintain your air conditioner.
Poor fan blades can also cause an air conditioner to stop cooling your home. To check this, turn off the power to your air conditioner. Then, take a look at the fan mounted on top of the outside condenser unit. If the blades are not properly aligned, you should replace them. This will prevent problems and increase the lifespan of your air conditioner. It’s best to do the replacement if the fans are worn out, or if you notice a lot of debris.